PDA

Afficher la version complète : probleme SATA



ghuntar00
15/01/2007, 22h03
Bonjour à tous,

j'ai installé la suse 10.2 sur un PC core duo.
Le Disque dur et le lecteur de DVD sont en SATA donc je n'ai pas reussi à faire l'install depuis le dvd (Lecteur non-reconnu en cours d'installation). J'ai du e rabattre sur une installation réseaux via internet qui a bien marché. Néanmoins quand le système démarre j'ai cette erreur :
<7>libata version 2.00 loaded.
<7>ata_piix 0000:00:1f.2: version 2.00ac7
<6>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
<6>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 193
<7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
<6>ata1: SATA max UDMA/133 cmd 0x2148 ctl 0x217E bmdma 0x2110 irq 193
<6>ata2: SATA max UDMA/133 cmd 0x2140 ctl 0x217A bmdma 0x2118 irq 193
<6>scsi0 : ata_piix
<6>ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
<6>ata1.00: ata1: dev 0 multi count 16
<6>ata1.00: configured for UDMA/133
<6>scsi1 : ata_piix
<6>ata2.00: ATAPI, max UDMA/33
<6>ata2.00: configured for UDMA/33
<5> Vendor: ATA Model: ST3250820AS Rev: 3.AA
<5> Type: Direct-Access ANSI SCSI revision: 05
<5>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 3a 00 00
<5>SCSI device sda: drive cache: write back
<5>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
<5>sda: Write Protect is off
<7>sda: Mode Sense: 00 3a 00 00
<5>SCSI device sda: drive cache: write back
<6> sda: sda1 sda2 sda3
<5>sd 0:0:0:0: Attached scsi disk sda
<5>sd 0:0:0:0: Attached scsi generic sg0 type 0
<3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
<4> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
<4>ata2: port is slow to respond, please be patient (Status 0xd0)
<3>ata2: port failed to respond (30 secs, Status 0xd0)
<6>ata2: soft resetting port
<6>ata2.00: configured for UDMA/33
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
<4> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
<4>ata2: port is slow to respond, please be patient (Status 0xd0)
<3>ata2: port failed to respond (30 secs, Status 0xd0)
<6>ata2: soft resetting port
<6>ata2.00: configured for UDMA/33
<6>ata2: EH complete
<3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
<4> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
<4>ata2: port is slow to respond, please be patient (Status 0xd0)
<3>ata2: port failed to respond (30 secs, Status 0xd0)
<6>ata2: soft resetting port
<6>ata2.00: configured for UDMA/33
<6>ata2: EH complete
<4>ata2.00: limiting speed to UDMA/25
<3>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
<3>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in
<4> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
<4>ata2: port is slow to respond, please be patient (Status 0xd0)
<3>ata2: port failed to respond (30 secs, Status 0xd0)
<6>ata2: soft resetting port
<6>ata2.00: configured for UDMA/25
<6>ata2: EH complete
<6>ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
<6>ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 193
<7>PCI: Setting latency timer of device 0000:00:1f.5 to 64
<6>ata3: SATA max UDMA/133 cmd 0x2138 ctl 0x2176 bmdma 0x20F0 irq 193
<6>ata4: SATA max UDMA/133 cmd 0x2130 ctl 0x2172 bmdma 0x20F8 irq 193
<6>scsi2 : ata_piix
<4>ATA: abnormal status 0x7F on port 0x213F
<6>scsi3 : ata_piix
<4>ATA: abnormal status 0x7F on port 0x2137
<6>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 169
<7>PCI: Setting latency timer of device 0000:02:00.0 to 64
<6>ata5: PATA max UDMA/100 cmd 0x1018 ctl 0x1026 bmdma 0x1000 irq 169
<6>scsi4 : pata_marvell
<4>BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00
<4>ATA: abnormal status 0x7F on port 0x101F
<6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
<5>ReiserFS: sda2: found reiserfs format "3.6" with standard journal
<5>ReiserFS: sda2: using ordered data mode
J'aimerai donc savoir si cela signifie que mon SATA tourne en UDMA/25?
Si oui comment réparer cela?

J'ai vu que le mode SATA du bios était IDE (autre choix possible RAID ou AHCI). SI ca peux aider.

Merci à tous.

galagann
16/01/2007, 20h24
Tu as une idée de la marque et référence du controleur SATA ?

ghuntar00
16/01/2007, 22h21
Salut et merci de m'aider.

J'ai pas bcp de doc sur le PC. La carte mère est basée sur le chipset Q865 Express.
Sous Yast il me donne comme info sur le controleur sata: INTEL SATA controlleur, Pilote : ata_piix

Merci encore ...