PDA

Afficher la version complète : [Réglé] [Réglé] lecteur 6 en 1



suzax
09/03/2007, 08h17
bonjour,
voila j'ai un laptop hp. le lecteur 6 en 1 n'est pas detecté par suse. néamoin, j'ai trouvé un outil "HP toolbox" j'ai voulu savoir à quoi il servait vu que j'ai un HP http://www.alionet.org/style_emoticons/<#EMO_DIR#>/smile.gif mais j'ai eu le message d'erreur suivant: No HP all-in-one device found (those devices require a special setup). si quelqu'un set cette procedure spéciale que je dois faire pour l'installé ce serait sympa qu'il me le dise

Heero_Yuy
09/03/2007, 09h13
Salux,

HP toolbox concerne en fait les multifonctions (imprimantes + scanner) donc il ne te sera d'aucune utilité pour ton lecteur de cartes (en tout cas, c'est ce que j'ai lu dans la description du package donnée par Yast).

Concernant ton lecteur de carte, as-tu inséré une carte mémoire à l'intérieur ?

Sinon, dans un terminal, fais :


lsusb

suzax
09/03/2007, 11h58
Salux,

HP toolbox concerne en fait les multifonctions (imprimantes + scanner) donc il ne te sera d'aucune utilité pour ton lecteur de cartes (en tout cas, c'est ce que j'ai lu dans la description du package donnée par Yast).

Concernant ton lecteur de carte, as-tu inséré une carte mémoire à l'intérieur ?

Sinon, dans un terminal, fais :


lsusb[/b]
voila j'ai inséré une carte SD et saisi dans un terminal lsusb et voila ce que ça me donne:

Bus 003 Device 001: ID 0000:0000
Bus 001 Device 005: ID 0458:0036 KYE Systems Corp. (Mouse Systems)
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000

j'ai rien compris http://www.alionet.org/style_emoticons/<#EMO_DIR#>/blink.gif

Heero_Yuy
09/03/2007, 12h20
Et quand tu as inséré ta SD, il ne t'a pas ouvert une fenêtre te demandant si tu voulais ouvrir un explorateur (ou je ne sais trop quoi dans le style) ?

Essayes cette commande :


hwinfo --usb

Et réessayes les 2 commandes en root.




Une autre idée qui me passe par la tête, ton lecteur n'est peut-être pas relié sur un port USB interne, mais peut-être en PCI. Les commandes :


lspci

et


hwinfo --pci

Et aussi, donnes-nous la référence exacte de ton laptop, pour qu'on en sache davantage.

suzax
09/03/2007, 13h26
non quand j'ai inséré la SD il n'y a aucune boite de dialogue qui apparait
voila les résultats de chaque commande:



mysuse:/home/beast_of_fire # hwinfo --usb
03: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_0_if0
Unique ID: k4bc.oooF2PClr64
SysFS ID: /devices/pci0000:00/0000:00:13.0/usb1/1-0:1.0
SysFS BusID: 1-0:1.0
Hardware Class: hub
Model: "Linux 2.6.18.2-34-default ohci_hcd OHCI Host Controller"
Hotplug: USB
Vendor: "Linux 2.6.18.2-34-default ohci_hcd"
Device: "OHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:13.0"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=new, avail=yes, need=no, active=unknown

04: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_1_if0
Unique ID: pBe4.ZXtqP9+SoOB
SysFS ID: /devices/pci0000:00/0000:00:13.1/usb2/2-0:1.0
SysFS BusID: 2-0:1.0
Hardware Class: hub
Model: "Linux 2.6.18.2-34-default ohci_hcd OHCI Host Controller"
Hotplug: USB
Vendor: "Linux 2.6.18.2-34-default ohci_hcd"
Device: "OHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:13.1"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 12 Mbps
Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=new, avail=yes, need=no, active=unknown

05: USB 00.0: 10a00 Hub
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_13_2_if0
Unique ID: uIhY.m5_wGFLIwcC
SysFS ID: /devices/pci0000:00/0000:00:13.2/usb3/3-0:1.0
SysFS BusID: 3-0:1.0
Hardware Class: hub
Model: "Linux 2.6.18.2-34-default ehci_hcd EHCI Host Controller"
Hotplug: USB
Vendor: "Linux 2.6.18.2-34-default ehci_hcd"
Device: "EHCI Host Controller"
Revision: "2.06"
Serial ID: "0000:00:13.2"
Driver: "hub"
Driver Modules: "usbcore"
Speed: 480 Mbps
Module Alias: "usb:v0000p0000d0206dc09dsc00dp01ic09isc00ip00"
Driver Info #0:
Driver Status: usbcore is active
Driver Activation Cmd: "modprobe usbcore"
Config Status: cfg=new, avail=yes, need=no, active=unknown

06: USB 00.0: 10503 USB Mouse
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_458_36_noserial_if0
Unique ID: ADDn.cnxmJmjFmy4
Parent ID: k4bc.oooF2PClr64
SysFS ID: /devices/pci0000:00/0000:00:13.0/usb1/1-1/1-1:1.0
SysFS BusID: 1-1:1.0
Hardware Class: mouse
Model: "KYE NetScroll + Mini Traveler"
Hotplug: USB
Vendor: usb 0x0458 "KYE Systems"
Device: usb 0x0036 "NetScroll + Mini Traveler"
Revision: "1.10"
Compatible to: int 0x0210 0x0013
Driver: "usbhid"
Driver Modules: "usbhid"
Device File: /dev/input/mice (/dev/input/mouse1)
Device Files: /dev/input/mice, /dev/input/mouse1, /dev/input/event3, /dev/inpu t/by-id/usb-Genius_NetScroll_+_Mini_Traveler-event-mouse, /dev/input/by-path/pci -0000:00:13.0-usb-0:1:1.0-event-mouse, /dev/input/by-id/usb-Genius_NetScroll_+_M ini_Traveler-mouse, /dev/input/by-path/pci-0000:00:13.0-usb-0:1:1.0-mouse
Device Number: char 13:63 (char 13:33)
Speed: 1.5 Mbps
Module Alias: "usb:v0458p0036d0110dc00dsc00dp00ic03isc01ip02"
Driver Info #0:
Buttons: 3
Wheels: 1
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #3 (Hub)
mysuse:/home/beast_of_fire #


mysuse:/home/beast_of_fire # lspci
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 02)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
05:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
05:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
05:09.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
05:09.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
05:09.4 Generic system peripheral [Class 0805]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller

mysuse:/home/beast_of_fire # lspci
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 02)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
05:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
05:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
05:09.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
05:09.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
05:09.4 Generic system peripheral [Class 0805]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller


<div class='codetop'>CODE</div><div class='codemain' style='height:200px;white-space:pre;overflow:auto'>mysuse:/home/beast_of_fire # hwinfo --pci
09: PCI 00.0: 0600 Host bridge
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1002_5950
Unique ID: qLht.xEX7N3VapP1
SysFS ID: /devices/pci0000:00/0000:00:00.0
SysFS BusID: 0000:00:00.0
Hardware Class: bridge
Model: "Hewlett-Packard Company RS480 Host Bridge"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x5950 "RS480 Host Bridge"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3091
Revision: 0x01
Module Alias: "pci:v00001002d00005950sv0000103Csd00003091bc06sc00 i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown

10: PCI 01.0: 0604 PCI bridge (Normal decode)
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1002_5a3f
Unique ID: vSkL.dQFUNbiC_g9
SysFS ID: /devices/pci0000:00/0000:00:01.0
SysFS BusID: 0000:00:01.0
Hardware Class: bridge
Model: "ATI RS480 PCI Bridge"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x5a3f "RS480 PCI Bridge"
Module Alias: "pci:v00001002d00005A3Fsv00000000sd00000000bc06sc04 i00"
Driver Info #0:
Driver Status: shpchp is active
Driver Activation Cmd: "modprobe shpchp"
Config Status: cfg=no, avail=yes, need=no, active=unknown

11: PCI 13.0: 0c03 USB Controller (OHCI)
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1002_4374
Unique ID: HSco.nPm1IawE3O4
SysFS ID: /devices/pci0000:00/0000:00:13.0
SysFS BusID: 0000:00:13.0
Hardware Class: usb controller
Model: "Hewlett-Packard Company IXP SB400 USB Host Controller"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4374 "IXP SB400 USB Host Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3091
Driver: "ohci_hcd"
Driver Modules: "ohci_hcd"
Memory Range: 0xc0000000-0xc0000fff (rw,non-prefetchable)
IRQ: 193 (511173 events)
Module Alias: "pci:v00001002d00004374sv0000103Csd00003091bc0Csc03 i10"
Driver Info #0:
Driver Status: ohci-hcd is active
Driver Activation Cmd: "modprobe ohci-hcd"
Config Status: cfg=no, avail=yes, need=no, active=unknown

12: PCI 13.1: 0c03 USB Controller (OHCI)
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1002_4375
Unique ID: 9n5e.Iqinm82yam4
SysFS ID: /devices/pci0000:00/0000:00:13.1
SysFS BusID: 0000:00:13.1
Hardware Class: usb controller
Model: "Hewlett-Packard Company IXP SB400 USB Host Controller"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4375 "IXP SB400 USB Host Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3091
Driver: "ohci_hcd"
Driver Modules: "ohci_hcd"
Memory Range: 0xc0001000-0xc0001fff (rw,non-prefetchable)
IRQ: 193 (511173 events)
Module Alias: "pci:v00001002d00004375sv0000103Csd00003091bc0Csc03 i10"
Driver Info #0:
Driver Status: ohci-hcd is active
Driver Activation Cmd: "modprobe ohci-hcd"
Config Status: cfg=no, avail=yes, need=no, active=unknown

13: PCI 13.2: 0c03 USB Controller (EHCI)
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1002_4373
Unique ID: 06bT.W+cNyVgh99A
SysFS ID: /devices/pci0000:00/0000:00:13.2
SysFS BusID: 0000:00:13.2
Hardware Class: usb controller
Model: "Hewlett-Packard Company IXP SB400 USB2 Host Controller"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4373 "IXP SB400 USB2 Host Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3091
Driver: "ehci_hcd"
Driver Modules: "ehci_hcd"
Memory Range: 0xc0002000-0xc0002fff (rw,non-prefetchable)
IRQ: 193 (511173 events)
Module Alias: "pci:v00001002d00004373sv0000103Csd00003091bc0Csc03 i20"
Driver Info #0:
Driver Status: ehci-hcd is active
Driver Activation Cmd: "modprobe ehci-hcd"
Config Status: cfg=no, avail=yes, need=no, active=unknown

14: PCI 14.0: 0c05 SMBus
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1002_4372
Unique ID: MZfG.IyHI1_UBN+7
SysFS ID: /devices/pci0000:00/0000:00:14.0
SysFS BusID: 0000:00:14.0
Hardware Class: unknown
Model: "Hewlett-Packard Company IXP SB400 SMBus Controller"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4372 "IXP SB400 SMBus Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3091
Revision: 0x11
Driver: "piix4_smbus"
Driver Modules: "i2c_piix4"
I/O Ports: 0x8400-0x840f (rw)
Memory Range: 0xc0003000-0xc00033ff (rw,non-prefetchable)
Module Alias: "pci:v00001002d00004372sv0000103Csd00003091bc0Csc05 i00"
Driver Info #0:
Driver Status: i2c_piix4 is active
Driver Activation Cmd: "modprobe i2c_piix4"
Config Status: cfg=no, avail=yes, need=no, active=unknown

15: PCI 14.1: 0101 IDE interface
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1002_4376
Unique ID: Eu86.WOtMfamEVcC
SysFS ID: /devices/pci0000:00/0000:00:14.1
SysFS BusID: 0000:00:14.1
Hardware Class: storage
Model: "Hewlett-Packard Company Standard Dual Channel PCI IDE Controller ATI"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4376 "Standard Dual Channel PCI IDE Controller ATI"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3091
Driver: "ATIIXP_IDE"
Driver Modules: "atiixp"
I/O Ports: 0x8410-0x841f (rw)
IRQ: 185 (no events)
I/O Ports: 0x1f0-0x1f7 (rw)
I/O Port: 0x3f6 (rw)
I/O Ports: 0x170-0x177 (rw)
I/O Port: 0x376 (rw)
IRQ: 14 (821133 events)
IRQ: 15 (245202 events)
Module Alias: "pci:v00001002d00004376sv0000103Csd00003091bc01sc01 i8a"
Driver Info #0:
Driver Status: atiixp is active
Driver Activation Cmd: "modprobe atiixp"
Driver Info #1:
Driver Status: pata_atiixp is not active
Driver Activation Cmd: "modprobe pata_atiixp"
Driver Info #2:
Driver Status: generic is not active
Driver Activation Cmd: "modprobe generic"
Config Status: cfg=no, avail=yes, need=no, active=unknown

16: PCI 14.3: 0601 ISA bridge
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1002_4377
Unique ID: yX7n.yJbH_SdNh0E
SysFS ID: /devices/pci0000:00/0000:00:14.3
SysFS BusID: 0000:00:14.3
Hardware Class: bridge
Model: "Hewlett-Packard Company IXP SB400 PCI-ISA Bridge"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4377 "IXP SB400 PCI-ISA Bridge"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3091
Module Alias: "pci:v00001002d00004377sv0000103Csd00003091bc06sc01 i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown

17: PCI 14.4: 0604 PCI bridge (Subtractive decode)
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1002_4371
Unique ID: qscc.hTSZxA6Z5F6
SysFS ID: /devices/pci0000:00/0000:00:14.4
SysFS BusID: 0000:00:14.4
Hardware Class: bridge
Model: "ATI IXP SB400 PCI-PCI Bridge"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4371 "IXP SB400 PCI-PCI Bridge"
Module Alias: "pci:v00001002d00004371sv00000000sd00000000bc06sc04 i01"
Config Status: cfg=no, avail=yes, need=no, active=unknown

18: PCI 14.5: 0401 Multimedia audio controller
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1002_4370
Unique ID: hB6S.L5dNhpXiKTC
SysFS ID: /devices/pci0000:00/0000:00:14.5
SysFS BusID: 0000:00:14.5
Hardware Class: sound
Model: "Hewlett-Packard Company IXP SB400 AC'97 Audio Controller"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4370 "IXP SB400 AC'97 Audio Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3091
Revision: 0x02
Driver: "ATI IXP AC97 controller"
Driver Modules: "snd_atiixp"
Memory Range: 0xc0003400-0xc00034ff (rw,non-prefetchable)
IRQ: 177 (5089610 events)
Module Alias: "pci:v00001002d00004370sv0000103Csd00003091bc04sc01 i00"
Driver Info #0:
Driver Status: snd_atiixp is active
Driver Activation Cmd: "modprobe snd_atiixp"
Config Status: cfg=yes, avail=yes, need=no, active=unknown

19: PCI 14.6: 0703 Modem (Generic)
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1002_4378
Unique ID: YWbH.YHjXbhWQHx0
SysFS ID: /devices/pci0000:00/0000:00:14.6
SysFS BusID: 0000:00:14.6
Hardware Class: modem
Model: "Hewlett-Packard Company ATI SB400 - AC'97 Modem Controller"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4378 "ATI SB400 - AC'97 Modem Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3091
Revision: 0x02
Memory Range: 0xc0003800-0xc00038ff (rw,non-prefetchable,disabled)
IRQ: 177 (5089610 events)
Module Alias: "pci:v00001002d00004378sv0000103Csd00003091bc07sc03 i00"
Driver Info #0:
Driver Status: snd_atiixp_modem is not active
Driver Activation Cmd: "modprobe snd_atiixp_modem"
Config Status: cfg=no, avail=yes, need=no, active=unknown

20: PCI 18.0: 0600 Host bridge
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1022_1100
Unique ID: fiDB.ptk_g9XAN03
SysFS ID: /devices/pci0000:00/0000:00:18.0
SysFS BusID: 0000:00:18.0
Hardware Class: bridge
Model: "AMD K8 [Athlon64/Opteron] HyperTransport Technology Configuration"
Vendor: pci 0x1022 "AMD"
Device: pci 0x1100 "K8 [Athlon64/Opteron] HyperTransport Technology Configuration"
Module Alias: "pci:v00001022d00001100sv00000000sd00000000bc06sc00 i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown

21: PCI 18.1: 0600 Host bridge
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1022_1101
Unique ID: W1j0.KIhk9ketuO3
SysFS ID: /devices/pci0000:00/0000:00:18.1
SysFS BusID: 0000:00:18.1
Hardware Class: bridge
Model: "AMD K8 [Athlon64/Opteron] Address Map"
Vendor: pci 0x1022 "AMD"
Device: pci 0x1101 "K8 [Athlon64/Opteron] Address Map"
Module Alias: "pci:v00001022d00001101sv00000000sd00000000bc06sc00 i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown

22: PCI 18.2: 0600 Host bridge
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1022_1102
Unique ID: OMCs.ridUeImaQn3
SysFS ID: /devices/pci0000:00/0000:00:18.2
SysFS BusID: 0000:00:18.2
Hardware Class: bridge
Model: "AMD K8 [Athlon64/Opteron] DRAM Controller"
Vendor: pci 0x1022 "AMD"
Device: pci 0x1102 "K8 [Athlon64/Opteron] DRAM Controller"
Module Alias: "pci:v00001022d00001102sv00000000sd00000000bc06sc00 i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown

23: PCI 18.3: 0600 Host bridge
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1022_1103
Unique ID: Fhhh.M7aE7ttHy94
SysFS ID: /devices/pci0000:00/0000:00:18.3
SysFS BusID: 0000:00:18.3
Hardware Class: bridge
Model: "AMD K8 [Athlon64/Opteron] Miscellaneous Control"
Vendor: pci 0x1022 "AMD"
Device: pci 0x1103 "K8 [Athlon64/Opteron] Miscellaneous Control"
Module Alias: "pci:v00001022d00001103sv00000000sd00000000bc06sc00 i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown

24: PCI 105.0: 0300 VGA compatible controller (VGA)
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1002_5955
Unique ID: ul7N.y1D2hAzM0iA
Parent ID: vSkL.dQFUNbiC_g9
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:05.0
SysFS BusID: 0000:01:05.0
Hardware Class: graphics card
Model: "Hewlett-Packard Company Radeon XPRESS 200M 5955 (PCIE)"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x5955 "Radeon XPRESS 200M 5955 (PCIE)"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3091
Driver: "fglrx_pci"
Driver Modules: "fglrx"
Memory Range: 0xc8000000-0xcfffffff (rw,prefetchable)
I/O Ports: 0x9000-0x9fff (rw)
Memory Range: 0xc0100000-0xc010ffff (rw,non-prefetchable)
Memory Range: 0xc0120000-0xc013ffff (ro,prefetchable,disabled)
IRQ: 177 (5089610 events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v00001002d00005955sv0000103Csd00003091bc03sc00 i00"
Driver Info #0:
XFree86 v4 Server Module: radeon
Driver Info #1:
XFree86 v4 Server Module: fglrx
3D Support: yes
Extensions: dri
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #10 (PCI bridge)

25: PCI 500.0: 0200 Ethernet controller
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_10ec_8139
Unique ID: rBUF.1yOQ3Ja24v3
Parent ID: qscc.hTSZxA6Z5F6
SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:05:00.0
SysFS BusID: 0000:05:00.0
Hardware Class: network
Model: "Hewlett-Packard Company RTL-8139/8139C/8139C+"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8139 "RTL-8139/8139C/8139C+"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3091
Revision: 0x10
Driver: "8139too"
Driver Modules: "8139too"
Device File: eth0
I/O Ports: 0xa000-0xafff (rw)
Memory Range: 0xc0208000-0xc02080ff (rw,non-prefetchable)
IRQ: 201 (2634348 events)
HW Address: 00:c0:9f:b7:1c:4e
Link detected: yes
Module Alias: "pci:v000010ECd00008139sv0000103Csd00003091bc02sc00 i00"
Driver Info #0:
Driver Status: 8139too is active
Driver Activation Cmd: "modprobe 8139too"
Driver Info #1:
Driver Status: 8139cp is not active
Driver Activation Cmd: "modprobe 8139cp"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #17 (PCI bridge)

26: PCI 502.0: 0200 Ethernet controller
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_14e4_4318
Unique ID: JNkJ.WtyNdWdm+pC
Parent ID: qscc.hTSZxA6Z5F6
SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:05:02.0
SysFS BusID: 0000:05:02.0
Hardware Class: network
Model: "Hewlett-Packard Company nx6125"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4318 "BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x1356 "nx6125"
Revision: 0x02
Driver: "bcm43xx"
Driver Modules: "bcm43xx"
Device File: eth1
Memory Range: 0xc0204000-0xc0205fff (rw,non-prefetchable)
IRQ: 217 (no events)
HW Address: 00:90:4b:f8:f2:30
Link detected: no
Module Alias: "pci:v000014E4d00004318sv0000103Csd00001356bc02sc80 i00"
Driver Info #0:
Driver Status: bcm43xx is active
Driver Activation Cmd: "modprobe bcm43xx"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #17 (PCI bridge)

27: PCI 509.0: 0607 CardBus bridge
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_104c_8031
Unique ID: vc7q.B+wQ0gknm3B
Parent ID: qscc.hTSZxA6Z5F6
SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:05:09.0
SysFS BusID: 0000:05:09.0
Hardware Class: bridge
Model: "Hewlett-Packard Company PCIxx21/x515 Cardbus Controller"
Vendor: pci 0x104c "Texas Instruments"
Device: pci 0x8031 "PCIxx21/x515 Cardbus Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3091
Driver: "yenta_cardbus"
Driver Modules: "yenta_socket"
Memory Range: 0xc0209000-0xc0209fff (rw,non-prefetchable)
IRQ: 177 (5089610 events)
Module Alias: "pci:v0000104Cd00008031sv0000103Csd00003091bc06sc07 i00"
Driver Info #0:
Driver Status: yenta_socket is active
Driver Activation Cmd: "modprobe yenta_socket"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #17 (PCI bridge)

28: PCI 509.2: 0c00 FireWire (IEEE 1394) (OHCI)
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_104c_8032
Unique ID: eG6V.RrvnOVJCwS1
Parent ID: qscc.hTSZxA6Z5F6
SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:05:09.2
SysFS BusID: 0000:05:09.2
Hardware Class: firewire controller
Model: "Hewlett-Packard Company OHCI Compliant IEEE 1394 Host Controller"
Vendor: pci 0x104c "Texas Instruments"
Device: pci 0x8032 "OHCI Compliant IEEE 1394 Host Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3091
Driver: "ohci1394"
Driver Modules: "ohci1394"
Memory Range: 0xc0208800-0xc0208fff (rw,non-prefetchable)
Memory Range: 0xc0200000-0xc0203fff (rw,non-prefetchable)
IRQ: 209 (3 events)
Module Alias: "pci:v0000104Cd00008032sv0000103Csd00003091bc0Csc00 i10"
Driver Info #0:
Driver Status: ohci1394 is active
Driver Activation Cmd: "modprobe ohci1394"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #17 (PCI bridge)

29: PCI 509.3: 0180 Unknown mass storage controller
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_104c_8033
Unique ID: WbbK.XyNGVm8XRF2
Parent ID: qscc.hTSZxA6Z5F6
SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:05:09.3
SysFS BusID: 0000:05:09.3
Hardware Class: storage
Model: "Hewlett-Packard Company PCIxx21 Integrated FlashMedia Controller"
Vendor: pci 0x104c "Texas Instruments"
Device: pci 0x8033 "PCIxx21 Integrated FlashMedia Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3091
Memory Range: 0xc0206000-0xc0207fff (rw,non-prefetchable)
IRQ: 10 (no events)
Module Alias: "pci:v0000104Cd00008033sv0000103Csd00003091bc01sc80 i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #17 (PCI bridge)

30: PCI 509.4: 0805 Generic system peripheral
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_104c_8034
Unique ID: Nw4A.kn_4zMtHqM6
Parent ID: qscc.hTSZxA6Z5F6
SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:05:09.4
SysFS BusID: 0000:05:09.4
Hardware Class: unknown
Model: "Hewlett-Packard Company PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller"
Vendor: pci 0x104c "Texas Instruments"
Device: pci 0x8034 "PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3091
Driver: "sdhci"
Driver Modules: "sdhci"
Memory Range: 0xc020a400-0xc020a4ff (rw,non-prefetchable)
Memory Range: 0xc020a000-0xc020a0ff (rw,non-prefetchable)
Memory Range: 0xc0208400-0xc02084ff (rw,non-prefetchable)
IRQ: 177 (5089610 events)
Module Alias: "pci:v0000104Cd00008034sv0000103Csd00003091bc08sc05 i00"
Driver Info #0:
Driver Status: sdhci is active
Driver Activation Cmd: "modprobe sdhci"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #17 (PCI bridge)
mysuse:/home/beast_of_fire # </div>

voila ci dessous la configuration de mon laptop:
ref : HP Pavilion ZE2000
processeur: AMD turion 64
mémoire: 512 mo partagé avec carte graphique
carte graphique: ATI X200 (128 MO)
j'éspère que je vous ai fourni les informations necessaires
merci d'avance pour ton aide http://www.alionet.org/style_emoticons/<#EMO_DIR#>/smile.gif

Heero_Yuy
09/03/2007, 14h33
Dans le lspci, j'ai pu identifier ton lecteur de carte (j'espère que je ne dis pas de c****ries) :

<div class='quotetop'>Citation (suzax @ 9/03/2007 à 12:26) <{POST_SNAPBACK}> (index.php?act=findpost&pid=128273)</div>
05:09.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller[/b]

et les informations la concernant (dans le hwinfo --pci)

<div class='quotetop'>Citation </div>
29: PCI 509.3: 0180 Unknown mass storage controller
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_104c_8033
Unique ID: WbbK.XyNGVm8XRF2
Parent ID: qscc.hTSZxA6Z5F6
SysFS ID: /devices/pci0000:00/0000:00:14.4/0000:05:09.3
SysFS BusID: 0000:05:09.3
Hardware Class: storage
Model: "Hewlett-Packard Company PCIxx21 Integrated FlashMedia Controller"
Vendor: pci 0x104c "Texas Instruments"
Device: pci 0x8033 "PCIxx21 Integrated FlashMedia Controller"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x3091
Memory Range: 0xc0206000-0xc0207fff (rw,non-prefetchable)
IRQ: 10 (no events)
Module Alias: "pci:v0000104Cd00008033sv0000103Csd00003091bc01sc80 i00"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #17 (PCI bridge)[/b]

Je vais regarder de plus près à cela.

<div class='quotetop'>Citation </div>
voila ci dessous la configuration de mon laptop:
ref : HP Pavilion ZE2000
processeur: AMD turion 64
mémoire: 512 mo partagé avec carte graphique
carte graphique: ATI X200 (128 MO)
j'éspère que je vous ai fourni les informations necessaires
merci d'avance pour ton aide http://www.alionet.org/style_emoticons/<#EMO_DIR#>/smile.gif[/b]
Impeccable.

Si ton allemand est bon, j'ai trouvé cela : http://www.root-forum.org/mobile-hardware/...und-nutzen.html (http://www.root-forum.org/mobile-hardware/3129-frage-zu-suse-10-2-integrierter-ti-card-reader-einbinden-und-nutzen.html)

Apparemment il s'agit du même problème. L'inconvénient c'est que c'est en Allemand et mon niveau est très basique. Je continue mes recherches.

J'ai trouvé cela aussi http://gentoo-wiki.com/HARDWARE_Gentoo_on_...avilion_dv8000z (http://gentoo-wiki.com/HARDWARE_Gentoo_on_HP_Pavilion_dv8000z)

Bon c'est pour un DV8000Z mais il a le même lecteur de carte. Sur ce lien (vu que c'est une Gentoo) il faut aller tripatouiller dans le Kernel. Peut-être pas recommandé (je ne connais pas ton niveau d'expérience sous Linux).

Je tombe souvent sur la même procédure (voir ici également : http://www.linuxquestions.org/questions/sh...912#post2618912 (http://www.linuxquestions.org/questions/showthread.php?p=2618912#post2618912))

Faire dans un terminal la commande suivante :


setpci -s 05:09.3 4c.b=02

Puis insérer une SD dans le lecteur et normalement elle est reconnue. A confirmer cependant, car cette commande interviendrait dans le cas où tu aurais cette ligne dans le lspci :

<div class='quotetop'>Citation </div>
Unknown mass storage controller: Texas Instruments PCI6411,6421,6611,6621,7411,7421,7611,7621 Flash Media Controller[/b]

Ce qui n'est pas le cas.

Je ne pourrais malheureusement pas t'en dire plus. Il reste des constructeurs de matériel qui ne fournissent pas des infos sur leur matériel pour développer des drivers Linux (exemple typique : webcam) et les lecteurs de cartes en font aussi parti apparemment.

suzax
09/03/2007, 15h28
merci pour ton aide http://www.alionet.org/style_emoticons/<#EMO_DIR#>/smile.gif je vais suivre les liens que tu m'a fourni et je posterais si je réussi à le faire fonctionné.

Heero_Yuy
09/03/2007, 15h31
OK. http://www.alionet.org/style_emoticons/<#EMO_DIR#>/wink.gif

suzax
09/03/2007, 15h39
voila ça marche bien avec cette commande comme tu me l'a dit:
setpci -s 05:09.3 4c.b=02
quand j'ai insérer la carte SD le voyant s'est allumer et hop la boite de dialogue http://www.alionet.org/style_emoticons/<#EMO_DIR#>/smile.gif
encore une fois merci de ton aide http://www.alionet.org/style_emoticons/<#EMO_DIR#>/smile.gif http://www.alionet.org/style_emoticons/<#EMO_DIR#>/smile.gif

Heero_Yuy
09/03/2007, 15h46
Je suis étonné moi-même d'avoir pu t'aider sur cette question http://www.alionet.org/style_emoticons/<#EMO_DIR#>/biggrin.gif . Je n'ai pas forcément les connaissances pour (sauf peut-être Google qui reste notre meilleur ami pour la recherche).

En tout cas, content que ton problème soit réglé.

N'oublie pas de mettre [Réglé] devant le titre de ton premier post. Si tu ne sais pas comment faire, il suffit d'éditer complètement le premier message et de compléter le titre. http://www.alionet.org/style_emoticons/<#EMO_DIR#>/wink.gif

Coin-coin
09/03/2007, 22h29
Salut,
Vu que Suzax a réglé son problème et qu'Angel59 a l'air d'une efficacité redoutable, je m'invite dans la conversation ! http://www.alionet.org/style_emoticons/<#EMO_DIR#>/wink.gif

J'ai un Asus M6Ne avec un lecteur de cartes 4 en 1 pas reconnu (ainsi que l'infrarouge, mais c'est moins crucial).

Physiquement, le lecteur est en deux parties et je pense l'avoir repéré dans la liste (il n'y avait pas de carte dedans) :

lspci

02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
02:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)

hwinfo --pci

22: PCI 201.0: 0607 CardBus bridge
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1180_476
Unique ID: GA8e.VEdx3D19ZvD
Parent ID: 6NW+.1yBhv2xnpj4
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:01.0
SysFS BusID: 0000:02:01.0
Hardware Class: bridge
Model: "ASUSTeK RL5c476 II"
Vendor: pci 0x1180 "Ricoh Co Ltd"
Device: pci 0x0476 "RL5c476 II"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x1864
Revision: 0xac
Driver: "yenta_cardbus"
Driver Modules: "yenta_socket"
Memory Range: 0xff900000-0xff900fff (rw,non-prefetchable)
IRQ: 4 (1608086 events)
Module Alias: "pci:v00001180d00000476sv00001043sd00001864bc06sc07 i00"
Driver Info #0:
Driver Status: yenta_socket is active
Driver Activation Cmd: "modprobe yenta_socket"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)

23: PCI 201.1: 0607 CardBus bridge
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1180_476_0
Unique ID: 7VdT.VEdx3D19ZvD
Parent ID: 6NW+.1yBhv2xnpj4
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:01.1
SysFS BusID: 0000:02:01.1
Hardware Class: bridge
Model: "ASUSTeK RL5c476 II"
Vendor: pci 0x1180 "Ricoh Co Ltd"
Device: pci 0x0476 "RL5c476 II"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x1864
Revision: 0xac
Driver: "yenta_cardbus"
Driver Modules: "yenta_socket"
Memory Range: 0xff901000-0xff901fff (rw,non-prefetchable)
IRQ: 11 (2130054 events)
Module Alias: "pci:v00001180d00000476sv00001043sd00001864bc06sc07 i00"
Driver Info #0:
Driver Status: yenta_socket is active
Driver Activation Cmd: "modprobe yenta_socket"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)


Si jamais ce n'était pas ça, voici la sortie complète des commandes :

lspci

00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 21)
00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 21)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
02:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
02:01.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 04)
02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)

hwinfo --pci
<div class='codetop'>CODE</div><div class='codemain' style='height:200px;white-space:pre;overflow:auto'>09: PCI(AGP) 00.0: 0600 Host bridge
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_8086_3340
Unique ID: qLht.HIIesbc+eW2
SysFS ID: /devices/pci0000:00/0000:00:00.0
SysFS BusID: 0000:00:00.0
Hardware Class: bridge
Model: "ASUSTeK 82855PM Processor to I/O Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x3340 "82855PM Processor to I/O Controller"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x186a
Revision: 0x21
Driver: "agpgart-intel"
Driver Modules: "intel_agp"
Memory Range: 0xe0000000-0xefffffff (rw,prefetchable)
Module Alias: "pci:v00008086d00003340sv00001043sd0000186Abc06sc00 i00"
Driver Info #0:
Driver Status: intel_agp is active
Driver Activation Cmd: "modprobe intel_agp"
Config Status: cfg=no, avail=yes, need=no, active=unknown

10: PCI 01.0: 0604 PCI bridge (Normal decode)
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_8086_3341
Unique ID: vSkL.VPA5WRkwsF4
SysFS ID: /devices/pci0000:00/0000:00:01.0
SysFS BusID: 0000:00:01.0
Hardware Class: bridge
Model: "Intel 82855PM Processor to AGP Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x3341 "82855PM Processor to AGP Controller"
Revision: 0x21
Module Alias: "pci:v00008086d00003341sv00000000sd00000000bc06sc04 i00"
Driver Info #0:
Driver Status: shpchp is active
Driver Activation Cmd: "modprobe shpchp"
Config Status: cfg=no, avail=yes, need=no, active=unknown

11: PCI 1d.0: 0c03 USB Controller (UHCI)
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_8086_24c2
Unique ID: 1GTX.MhrpStw0ev7
SysFS ID: /devices/pci0000:00/0000:00:1d.0
SysFS BusID: 0000:00:1d.0
Hardware Class: usb controller
Model: "ASUSTeK 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x24c2 "82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x1869
Revision: 0x03
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0xe800-0xe81f (rw)
IRQ: 11 (2130054 events)
Module Alias: "pci:v00008086d000024C2sv00001043sd00001869bc0Csc03 i00"
Driver Info #0:
Driver Status: uhci-hcd is active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=no, avail=yes, need=no, active=unknown

12: PCI 1d.1: 0c03 USB Controller (UHCI)
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_8086_24c4
Unique ID: vayM.OWkJQ0ARhg8
SysFS ID: /devices/pci0000:00/0000:00:1d.1
SysFS BusID: 0000:00:1d.1
Hardware Class: usb controller
Model: "ASUSTeK 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x24c4 "82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x1869
Revision: 0x03
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0xe880-0xe89f (rw)
IRQ: 5 (591885 events)
Module Alias: "pci:v00008086d000024C4sv00001043sd00001869bc0Csc03 i00"
Driver Info #0:
Driver Status: uhci-hcd is active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=no, avail=yes, need=no, active=unknown

13: PCI 1d.2: 0c03 USB Controller (UHCI)
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_8086_24c7
Unique ID: mvRC.xlZZsjWYGq9
SysFS ID: /devices/pci0000:00/0000:00:1d.2
SysFS BusID: 0000:00:1d.2
Hardware Class: usb controller
Model: "ASUSTeK 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x24c7 "82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x1869
Revision: 0x03
Driver: "uhci_hcd"
Driver Modules: "uhci_hcd"
I/O Ports: 0xec00-0xec1f (rw)
IRQ: 10 (8 events)
Module Alias: "pci:v00008086d000024C7sv00001043sd00001869bc0Csc03 i00"
Driver Info #0:
Driver Status: uhci-hcd is active
Driver Activation Cmd: "modprobe uhci-hcd"
Config Status: cfg=no, avail=yes, need=no, active=unknown

14: PCI 1d.7: 0c03 USB Controller (EHCI)
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_8086_24cd
Unique ID: 5YuN.0eEpwNkL4MD
SysFS ID: /devices/pci0000:00/0000:00:1d.7
SysFS BusID: 0000:00:1d.7
Hardware Class: usb controller
Model: "ASUSTeK 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x24cd "82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x1868
Revision: 0x03
Driver: "ehci_hcd"
Driver Modules: "ehci_hcd"
Memory Range: 0xffaffc00-0xffafffff (rw,non-prefetchable)
IRQ: 10 (8 events)
Module Alias: "pci:v00008086d000024CDsv00001043sd00001868bc0Csc03 i20"
Driver Info #0:
Driver Status: ehci-hcd is active
Driver Activation Cmd: "modprobe ehci-hcd"
Config Status: cfg=no, avail=yes, need=no, active=unknown

15: PCI 1e.0: 0604 PCI bridge (Normal decode)
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_8086_2448
Unique ID: 6NW+.1yBhv2xnpj4
SysFS ID: /devices/pci0000:00/0000:00:1e.0
SysFS BusID: 0000:00:1e.0
Hardware Class: bridge
Model: "Intel 82801 Mobile PCI Bridge"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x2448 "82801 Mobile PCI Bridge"
Revision: 0x83
Module Alias: "pci:v00008086d00002448sv00000000sd00000000bc06sc04 i00"
Driver Info #0:
Driver Status: shpchp is active
Driver Activation Cmd: "modprobe shpchp"
Config Status: cfg=no, avail=yes, need=no, active=unknown

16: PCI 1f.0: 0601 ISA bridge
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_8086_24cc
Unique ID: BUZT.YzqhtMifbpC
SysFS ID: /devices/pci0000:00/0000:00:1f.0
SysFS BusID: 0000:00:1f.0
Hardware Class: bridge
Model: "Intel 82801DBM (ICH4-M) LPC Interface Bridge"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x24cc "82801DBM (ICH4-M) LPC Interface Bridge"
Revision: 0x03
Module Alias: "pci:v00008086d000024CCsv00000000sd00000000bc06sc01 i00"
Driver Info #0:
Driver Status: intel_rng is not active
Driver Activation Cmd: "modprobe intel_rng"
Driver Info #1:
Driver Status: i8xx_tco is active
Driver Activation Cmd: "modprobe i8xx_tco"
Config Status: cfg=no, avail=yes, need=no, active=unknown

17: PCI 1f.1: 0101 IDE interface
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_8086_24ca
Unique ID: 3p2J.R9Qkrs5s771
SysFS ID: /devices/pci0000:00/0000:00:1f.1
SysFS BusID: 0000:00:1f.1
Hardware Class: storage
Model: "ASUSTeK 82801DBM (ICH4-M) IDE Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x24ca "82801DBM (ICH4-M) IDE Controller"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x1869
Revision: 0x03
Driver: "PIIX_IDE"
Driver Modules: "piix"
I/O Ports: 0xffa0-0xffaf (rw)
Memory Range: 0x30000000-0x300003ff (rw,non-prefetchable)
IRQ: 10 (8 events)
I/O Ports: 0x1f0-0x1f7 (rw)
I/O Port: 0x3f6 (rw)
I/O Ports: 0x170-0x177 (rw)
I/O Port: 0x376 (rw)
IRQ: 14 (381673 events)
IRQ: 15 (318614 events)
Module Alias: "pci:v00008086d000024CAsv00001043sd00001869bc01sc01 i8a"
Driver Info #0:
Driver Status: piix is active
Driver Activation Cmd: "modprobe piix"
Driver Info #1:
Driver Status: ata_piix is not active
Driver Activation Cmd: "modprobe ata_piix"
Driver Info #2:
Driver Status: generic is not active
Driver Activation Cmd: "modprobe generic"
Config Status: cfg=no, avail=yes, need=no, active=unknown

18: PCI 1f.5: 0401 Multimedia audio controller
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_8086_24c5
Unique ID: W60f.mJy_uaGYcu7
SysFS ID: /devices/pci0000:00/0000:00:1f.5
SysFS BusID: 0000:00:1f.5
Hardware Class: sound
Model: "ASUSTeK 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x24c5 "82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x1713
Revision: 0x03
Driver: "Intel ICH"
Driver Modules: "snd_intel8x0"
I/O Ports: 0xee00-0xeeff (rw)
I/O Ports: 0xe000-0xe03f (rw)
Memory Range: 0xffaff800-0xffaff9ff (rw,non-prefetchable)
Memory Range: 0xffaff400-0xffaff4ff (rw,non-prefetchable)
IRQ: 4 (1608086 events)
Module Alias: "pci:v00008086d000024C5sv00001043sd00001713bc04sc01 i00"
Driver Info #0:
Driver Status: i810_audio is not active
Driver Activation Cmd: "modprobe i810_audio"
Driver Info #1:
Driver Status: snd_intel8x0 is active
Driver Activation Cmd: "modprobe snd_intel8x0"
Config Status: cfg=yes, avail=yes, need=no, active=unknown

19: PCI 1f.6: 10204 LinModem
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_8086_24c6
Unique ID: ORVU.NMd0oV9+C71
SysFS ID: /devices/pci0000:00/0000:00:1f.6
SysFS BusID: 0000:00:1f.6
Hardware Class: modem
Model: "ASUSTeK 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x24c6 "82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x1826
Revision: 0x03
Device File: /dev/ttySL0
Device Number: char 212:0
I/O Ports: 0xe400-0xe4ff (rw,disabled)
I/O Ports: 0xe080-0xe0ff (rw,disabled)
IRQ: 4 (1608086 events)
Module Alias: "pci:v00008086d000024C6sv00001043sd00001826bc07sc03 i00"
Driver Info #0:
Driver Status: slamr is not active
Driver Activation Cmd: "modprobe slamr"
Driver Info #1:
Driver Status: snd_intel8x0m is not active
Driver Activation Cmd: "modprobe snd_intel8x0m"
Config Status: cfg=no, avail=yes, need=no, active=unknown

20: PCI(AGP) 100.0: 0300 VGA compatible controller (VGA)
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1002_4e50
Unique ID: VCu0.RQ5sMEAEI_E
Parent ID: vSkL.VPA5WRkwsF4
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
SysFS BusID: 0000:01:00.0
Hardware Class: graphics card
Model: "ASUSTeK MOBILITY RADEON 9600/9700 (M10/M11 4E50)"
Vendor: pci 0x1002 "ATI Technologies Inc"
Device: pci 0x4e50 "MOBILITY RADEON 9600/9700 (M10/M11 4E50)"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x1772
Driver: "fglrx_pci"
Driver Modules: "fglrx"
Memory Range: 0xd0000000-0xd7ffffff (rw,prefetchable)
I/O Ports: 0xd800-0xd8ff (rw)
Memory Range: 0xff8f0000-0xff8fffff (rw,non-prefetchable)
Memory Range: 0xff8c0000-0xff8dffff (ro,prefetchable,disabled)
IRQ: 11 (2130054 events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v00001002d00004E50sv00001043sd00001772bc03sc00 i00"
Driver Info #0:
XFree86 v4 Server Module: fglrx
Driver Info #1:
XFree86 v4 Server Module: fglrx
3D Support: yes
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #10 (PCI bridge)

21: PCI 200.0: 0200 Ethernet controller
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_14e4_169c
Unique ID: rBUF.wh6vYZQxreF
Parent ID: 6NW+.1yBhv2xnpj4
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:00.0
SysFS BusID: 0000:02:00.0
Hardware Class: network
Model: "ASUSTeK NetXtreme BCM5788 Gigabit Ethernet"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x169c "NetXtreme BCM5788 Gigabit Ethernet"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x1735
Revision: 0x03
Driver: "tg3"
Driver Modules: "tg3"
Device File: eth0
Memory Range: 0xff9f0000-0xff9fffff (rw,non-prefetchable)
IRQ: 4 (1608086 events)
HW Address: 00:11:d8:25:84:67
Link detected: no
Module Alias: "pci:v000014E4d0000169Csv00001043sd00001735bc02sc00 i00"
Driver Info #0:
Driver Status: tg3 is active
Driver Activation Cmd: "modprobe tg3"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)

22: PCI 201.0: 0607 CardBus bridge
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1180_476
Unique ID: GA8e.VEdx3D19ZvD
Parent ID: 6NW+.1yBhv2xnpj4
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:01.0
SysFS BusID: 0000:02:01.0
Hardware Class: bridge
Model: "ASUSTeK RL5c476 II"
Vendor: pci 0x1180 "Ricoh Co Ltd"
Device: pci 0x0476 "RL5c476 II"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x1864
Revision: 0xac
Driver: "yenta_cardbus"
Driver Modules: "yenta_socket"
Memory Range: 0xff900000-0xff900fff (rw,non-prefetchable)
IRQ: 4 (1608086 events)
Module Alias: "pci:v00001180d00000476sv00001043sd00001864bc06sc07 i00"
Driver Info #0:
Driver Status: yenta_socket is active
Driver Activation Cmd: "modprobe yenta_socket"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)

23: PCI 201.1: 0607 CardBus bridge
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1180_476_0
Unique ID: 7VdT.VEdx3D19ZvD
Parent ID: 6NW+.1yBhv2xnpj4
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:01.1
SysFS BusID: 0000:02:01.1
Hardware Class: bridge
Model: "ASUSTeK RL5c476 II"
Vendor: pci 0x1180 "Ricoh Co Ltd"
Device: pci 0x0476 "RL5c476 II"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x1864
Revision: 0xac
Driver: "yenta_cardbus"
Driver Modules: "yenta_socket"
Memory Range: 0xff901000-0xff901fff (rw,non-prefetchable)
IRQ: 11 (2130054 events)
Module Alias: "pci:v00001180d00000476sv00001043sd00001864bc06sc07 i00"
Driver Info #0:
Driver Status: yenta_socket is active
Driver Activation Cmd: "modprobe yenta_socket"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)

24: PCI 201.2: 0c00 FireWire (IEEE 1394) (OHCI)
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1180_552
Unique ID: _p6J.E8S1GO+FtB1
Parent ID: 6NW+.1yBhv2xnpj4
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:01.2
SysFS BusID: 0000:02:01.2
Hardware Class: firewire controller
Model: "ASUSTeK R5C552 IEEE 1394 Controller"
Vendor: pci 0x1180 "Ricoh Co Ltd"
Device: pci 0x0552 "R5C552 IEEE 1394 Controller"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x1867
Revision: 0x04
Driver: "ohci1394"
Driver Modules: "ohci1394"
Memory Range: 0xff9df800-0xff9dffff (rw,non-prefetchable)
IRQ: 10 (8 events)
Module Alias: "pci:v00001180d00000552sv00001043sd00001867bc0Csc00 i10"
Driver Info #0:
Driver Status: ohci1394 is active
Driver Activation Cmd: "modprobe ohci1394"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)

25: PCI 202.0: 0282 WLAN controller
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_8086_4220
Unique ID: JNkJ.9J1F3mK3OuC
Parent ID: 6NW+.1yBhv2xnpj4
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:02.0
SysFS BusID: 0000:02:02.0
Hardware Class: network
Model: "Intel PRO/Wireless 2200BG Network Connection"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x4220 "PRO/Wireless 2200BG Network Connection"
SubVendor: pci 0x8086 "Intel Corporation"
SubDevice: pci 0x2701
Revision: 0x05
Driver: "ipw2200"
Driver Modules: "ipw2200"
Device File: eth1
Features: WLAN
Memory Range: 0xff9de000-0xff9defff (rw,non-prefetchable)
IRQ: 4 (1608086 events)
HW Address: 00:0e:35:96:57:28
Link detected: yes
Requires: ipw-firmware
Module Alias: "pci:v00008086d00004220sv00008086sd00002701bc02sc80 i00"
Driver Info #0:
Driver Status: ipw2200 is active
Driver Activation Cmd: "modprobe ipw2200"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)</div>

Heero_Yuy
12/03/2007, 10h21
Salut,
Vu que Suzax a réglé son problème et qu'Angel59 a l'air d'une efficacité redoutable, je m'invite dans la conversation ! http://www.alionet.org/style_emoticons/<#EMO_DIR#>/wink.gif[/b]

Salux,

Merci pour l'efficacité redoutable, mais comme je l'ai dis plus haut, je m'en étonne moi-même http://www.alionet.org/style_emoticons/<#EMO_DIR#>/wink.gif

<div class='quotetop'>Citation </div>
J'ai un Asus M6Ne avec un lecteur de cartes 4 en 1 pas reconnu (ainsi que l'infrarouge, mais c'est moins crucial).

Physiquement, le lecteur est en deux parties et je pense l'avoir repéré dans la liste (il n'y avait pas de carte dedans) :

lspci

02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
02:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)

hwinfo --pci

22: PCI 201.0: 0607 CardBus bridge
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1180_476
Unique ID: GA8e.VEdx3D19ZvD
Parent ID: 6NW+.1yBhv2xnpj4
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:01.0
SysFS BusID: 0000:02:01.0
Hardware Class: bridge
Model: "ASUSTeK RL5c476 II"
Vendor: pci 0x1180 "Ricoh Co Ltd"
Device: pci 0x0476 "RL5c476 II"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x1864
Revision: 0xac
Driver: "yenta_cardbus"
Driver Modules: "yenta_socket"
Memory Range: 0xff900000-0xff900fff (rw,non-prefetchable)
IRQ: 4 (1608086 events)
Module Alias: "pci:v00001180d00000476sv00001043sd00001864bc06sc07 i00"
Driver Info #0:
Driver Status: yenta_socket is active
Driver Activation Cmd: "modprobe yenta_socket"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)

23: PCI 201.1: 0607 CardBus bridge
[Created at pci.286]
UDI: /org/freedesktop/Hal/devices/pci_1180_476_0
Unique ID: 7VdT.VEdx3D19ZvD
Parent ID: 6NW+.1yBhv2xnpj4
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:01.1
SysFS BusID: 0000:02:01.1
Hardware Class: bridge
Model: "ASUSTeK RL5c476 II"
Vendor: pci 0x1180 "Ricoh Co Ltd"
Device: pci 0x0476 "RL5c476 II"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x1864
Revision: 0xac
Driver: "yenta_cardbus"
Driver Modules: "yenta_socket"
Memory Range: 0xff901000-0xff901fff (rw,non-prefetchable)
IRQ: 11 (2130054 events)
Module Alias: "pci:v00001180d00000476sv00001043sd00001864bc06sc07 i00"
Driver Info #0:
Driver Status: yenta_socket is active
Driver Activation Cmd: "modprobe yenta_socket"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)


Si jamais ce n'était pas ça, voici la sortie complète des commandes :[/b]

Effectivement, ça n'a pas l'air d'être ça. Donnes-nous plutôt le résultat d'un


lsusb

puis d'un


hwinfo --usb

En fait, d'une marque à l'autre, la connectique interne du lecteur de carte peut changer. Sur mon portable, il est branché en USB. Dans ton cas, ça m'a l'air d'être le cas, puisque ce que tu as reconnu comme ton lecteur de cartes, n'est pas ton lecteur de cartes, mais plutôt un pont (Bridge).