Salut,
Non, je n'ai créé aucun fichier pour configurer ma carte audio.
J'ai suivi ta dernière indication, ce matin j'ai reconfiguré la carte audio (car bien sûr elle était désactivée) puis activé pulseaudio.
Redémarré l'ordi (avec de nouveau l'icône audio grisée) et en console les commandes :
pacmd list-sinks | egrep 'index|name:|muted|device.description|active'
* index: 0
name: <auto_null>
muted: yes
device.description = "Sortie factice"
jean-luc@Host-001:~> pacmd list-sinks
1 sink(s) available.
* index: 0
name: <auto_null>
driver: <module-null-sink.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 1000
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: yes
current latency: 0,00 ms
max request: 19 KiB
max rewind: 19 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stéréo
used by: 0
linked by: 1
configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
module: 15
properties:
device.description = "Sortie factice"
device.class = "abstract"
device.icon_name = "audio-card"
Résultat pas surprenant puisque la carte audio est désactivée.
Si je la reconfigure et vais tout de suite faire les commandes (sans redémarrer l'ordi), bien sûr le résultat est différent.
pacmd list-sinks
1 sink(s) available.
* index: 1
name: <alsa_output.pci-0000_08_00.1.hdmi-stereo-extra1>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9030
volume: front-left: 32766 / 50% / -18,06 dB, front-right: 33422 / 51% / -17,55 dB
balance 0,02
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 1
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stéréo
used by: 0
linked by: 1
configured latency: 0,00 ms; range is 0,50 .. 1999,82 ms
card: 1 <alsa_card.pci-0000_08_00.1>
module: 29
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 1"
alsa.id = "HDMI 1"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "7"
alsa.card = "0"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xf6080000 irq 43"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:08:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0e0f"
device.product.name = "GK208 HDMI/DP Audio Controller"
device.string = "hdmi:0,1"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo-extra1"
device.profile.description = "Digital Stereo (HDMI 2)"
device.description = "GK208 HDMI/DP Audio Controller Digital Stereo (HDMI 2)"
alsa.mixer_name = "Nvidia GPU 51 HDMI/DP"
alsa.components = "HDA:10de0051,104385f7,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: yes)
properties:
device.icon_name = "video-display"
device.product.name = "PL2492H
"
active port: <hdmi-output-1>
jean-luc@Host-001:~> pacmd list-sinks | egrep 'index|name:|muted|device.description|active'
* index: 1
name: <alsa_output.pci-0000_08_00.1.hdmi-stereo-extra1>
muted: no
device.description = "GK208 HDMI/DP Audio Controller Digital Stereo (HDMI 2)"
active port: <hdmi-output-1>
Faut trouver la raison pourquoi le fait d'éteindre l'ordi annule la configuration de cette carte audio !!
Sujet: Son grésillant (Lu 24204 fois)
sujet précédent - sujet suivant
