31
Internet, réseaux et serveurs / Re : Configuration dns comment faire ?
yast ne démarre pas ?
Code: [Sélectionner]
# yast
C'est plus facile pour régler le réseau !
Cette espace vous permet de voir toutes les Messages réalisées par ce membre. Vous ne pouvez voir que les Messages réalisées dans les espaces auxquels vous avez accès.
# yast
Erreur de segmentation (core dumped)
tu n'a pas séparé, ta partition /home par défaut openSuSE propose de de placer dans une partition séparé, et je pense que c'est une bonne pratique. (sa permet de formaté la partition racine sans perte c'est données)
@install:~> du -hs /home
870G /home
install:~> sudo snapper ls
install:/home/florian # snapper ls
# | Type | Pre # | Date | Utilisateur | Espace utilisé | Nettoyer | Description | Données utilisateur
-----+--------+-------+----------------------------------+-------------+----------------+----------+-----------------------+--------------------
0 | single | | | root | | | current |
1* | single | | lun. 09 sept. 2019 11:59:57 CEST | root | 247,39 Mio | | first root filesystem |
99 | pre | | mar. 17 déc. 2019 13:01:22 CET | root | 1,86 Gio | number | zypp(zypper) | important=yes
100 | post | 99 | mar. 17 déc. 2019 13:39:21 CET | root | 192,80 Mio | number | | important=yes
103 | pre | | dim. 29 déc. 2019 12:59:33 CET | root | 439,16 Mio | number | zypp(zypper) | important=yes
104 | post | 103 | dim. 29 déc. 2019 22:23:55 CET | root | 267,75 Mio | number | | important=yes
florian@install:~> df -hT
Sys. de fichiers Type Taille Utilisé Dispo Uti% Monté sur
devtmpfs devtmpfs 3,4G 0 3,4G 0% /dev
tmpfs tmpfs 3,4G 154M 3,3G 5% /dev/shm
tmpfs tmpfs 3,4G 1,8M 3,4G 1% /run
tmpfs tmpfs 3,4G 0 3,4G 0% /sys/fs/cgroup
/dev/sda2 btrfs 930G 893G 36G 97% /
/dev/sda2 btrfs 930G 893G 36G 97% /.snapshots
/dev/sda2 btrfs 930G 893G 36G 97% /srv
/dev/sda2 btrfs 930G 893G 36G 97% /opt
/dev/sda2 btrfs 930G 893G 36G 97% /var
/dev/sda2 btrfs 930G 893G 36G 97% /tmp
/dev/sda2 btrfs 930G 893G 36G 97% /boot/grub2/x86_64-efi
/dev/sda2 btrfs 930G 893G 36G 97% /usr/local
/dev/sda2 btrfs 930G 893G 36G 97% /boot/grub2/i386-pc
/dev/sda2 btrfs 930G 893G 36G 97% /home
/dev/sda2 btrfs 930G 893G 36G 97% /root
tmpfs tmpfs 691M 16K 691M 1% /run/user/1000
/dev/sdb1 vfat 30G 3,0G 27G 11% /run/media/florian/CANON
install:/home/florian # lsusb
Bus 001 Device 023: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
install:/home/florian # service bluetooth status
* bluetooth.service - Bluetooth service
Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; enabled; vendor preset: disable>
Active: active (running) since Tue 2019-12-17 18:23:38 CET; 3 days ago
Docs: man:bluetoothd(8)
Main PID: 1404 (bluetoothd)
Tasks: 1 (limit: 4915)
Memory: 2.2M
CGroup: /system.slice/bluetooth.service
`-1404 /usr/lib/bluetooth/bluetoothd
install:/home/florian # rfkill
ID TYPE DEVICE SOFT HARD
0 wlan phy0 bloqué débloqué
1 bluetooth hci0 débloqué débloqué
3 bluetooth hci1 débloqué débloqué
install:/home/florian # hciconfig hci1 reset
Can't init device hci1: Operation not supported (95)
install:/home/florian # hcidump -i hci1
< HCI Command: Delete Stored Link Key (0x03|0x0012) plen 7
bdaddr 00:00:00:00:00:00 all 1
> HCI Event: Command Complete (0x0e) plen 6
Delete Stored Link Key (0x03|0x0012) ncmd 1
status 0x11 deleted 0
Error: Unsupported Feature or Parameter Value
if (!rp->status) {
if (le16_to_cpu(rp->manufacturer) != 10) {
/* Clear the reset quirk since this is not an actual
* early Bluetooth 1.1 device from CSR.
*/
clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
/* These fake CSR controllers have all a broken
* stored link key handling and so just disable it.
*/
set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY,
&hdev->quirks);
if (id->driver_info & BTUSB_CSR) {
struct usb_device *udev = data->udev;
u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice);
/* Old firmware would otherwise execute USB reset */
if (bcdDevice < 0x117)
set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
/* Fake CSR devices with broken commands */
if (bcdDevice <= 0x100)
hdev->setup = btusb_setup_csr;
}