244
Salut,
J'ai eu le même souci avec Kile que @stobbart81 ...
Du coup j'utilise TexWorks.
@chalu :
S | Name | Type | Version | Arch | Repository
---+-----------+--------+-------------+--------------+----------------------
i+ | kile | paquet | 2.9.93-2.10 | x86_64 | Dépôt principal (OSS)
v | kile | paquet | 2.9.93-2.10 | i586 | Dépôt principal (OSS)
i | kile-lang | paquet | 2.9.93-2.10 | noarch | Dépôt principal (OSS)
à plus,
oh!rocks
249
Salut @Pascal
Je n'ai pas d'attribut 231...
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 100 100 050 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always - 0
7 Unknown_SSD_Attribute 0x000b 100 100 050 Pre-fail Always - 0
8 Unknown_SSD_Attribute 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 12552
10 Unknown_SSD_Attribute 0x0013 100 100 050 Pre-fail Always - 0
12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 6298
167 SSD_Protect_Mode 0x0022 100 100 000 Old_age Always - 0
168 SATA_PHY_Error_Count 0x0012 100 100 000 Old_age Always - 2
169 Bad_Block_Count 0x0013 100 100 010 Pre-fail Always - 100
170 Unknown_Attribute 0x0013 100 100 010 Pre-fail Always - 0
173 Erase_Count 0x0012 176 176 000 Old_age Always - 0
175 Program_Fail_Count_Chip 0x0013 100 100 010 Pre-fail Always - 0
192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 69
194 Temperature_Celsius 0x0022 071 049 000 Old_age Always - 29 (Min/Max 1/51)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
240 Unknown_SSD_Attribute 0x0013 100 100 050 Pre-fail Always - 0
à plus,
oh!rocks
251
Bonjour toutes et tous,
À chaque démarrage du PC portable (un Thinkpad x240) j'ai une jolie pop-up avec ce message :
Le périphérique de stockage TOSHIBA THNSNJ128GCSU (/dev/sda) affiche des signes d'instabilité.
Avec la commande smartctl -a /dev/sda, j'ai deux erreurs :
Error 2 occurred at disk power-on lifetime: 6938 hours (289 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 00 e0 42 40 Error: ICRC, ABRT at LBA = 0x0042e000 = 4382720
et (presque pareille) :
Error 1 occurred at disk power-on lifetime: 6918 hours (288 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 28 00 34 6d 40 Error: ICRC, ABRT at LBA = 0x006d3400 = 7156736
Dois-je commencer à économiser pour faire changer le disque dur ?
à plus,
oh!rocks