Aller au contenu principal
Sujet: MAJ Tumbleweed (Lu 4876 fois) sujet précédent - sujet suivant

Re : MAJ Tumbleweed

Répondre #15
Je penche pour le bug... Nouveau résultat après qq minutes (/usr occupé à 100 % !) :
Filesystem     Type      Size  Used Avail Use% Mounted on
devtmpfs       devtmpfs  7.8G     0  7.8G   0% /dev
tmpfs          tmpfs     7.8G   44M  7.8G   1% /dev/shm
tmpfs          tmpfs     7.8G  1.7M  7.8G   1% /run
tmpfs          tmpfs     7.8G     0  7.8G   0% /sys/fs/cgroup
/dev/sda3      btrfs     5.0G  353M  4.5G   8% /
/dev/sda5      btrfs      35G  7.0G     0 100% /usr
/dev/sda2      btrfs     1.0G   55M  848M   7% /boot
/dev/sda9      btrfs     3.2G  7.5M  3.2G   1% /tmp
/dev/sda8      btrfs     2.0G  3.4M  2.0G   1% /srv
/dev/sda3      btrfs     5.0G  353M  4.5G   8% /root
/dev/sda6      btrfs     7.0G  234M  6.8G   4% /opt
/dev/sda7      btrfs     6.0G  275M  5.5G   5% /var
/dev/sda1      vfat      511M  5.4M  506M   2% /boot/efi
/dev/sdb3      xfs       1.1T  180G  845G  18% /data
/dev/sdb2      xfs       830G  219G  612G  27% /home
tmpfs          tmpfs     1.6G   12K  1.6G   1% /run/user/1000

Re : MAJ Tumbleweed

Répondre #16
Du coup, pris d'un doute, j'ai testé mon disque. A priori ca va.
smartctl -a /dev/sda
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.14-2-default] (SUSE RPM)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Crucial/Micron RealSSD m4/C400/P400
Device Model:     M4-CT064M4SSD2
Serial Number:    00000000111703068B3C
LU WWN Device Id: 5 00a075 103068b3c
Firmware Version: 040H
User Capacity:    64,023,257,088 bytes [64.0 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Feb  5 16:10:45 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  295) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (   4) minutes.
Conveyance self-test routine
recommended polling time:        (   3) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   050    Pre-fail  Always       -       0
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   100   100   001    Old_age   Always       -       36798
 12 Power_Cycle_Count       0x0032   100   100   001    Old_age   Always       -       3108
170 Grown_Failing_Block_Ct  0x0033   100   100   010    Pre-fail  Always       -       0
171 Program_Fail_Count      0x0032   100   100   001    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   100   100   001    Old_age   Always       -       0
173 Wear_Leveling_Count     0x0033   097   097   010    Pre-fail  Always       -       104
174 Unexpect_Power_Loss_Ct  0x0032   100   100   001    Old_age   Always       -       157
181 Non4k_Aligned_Access    0x0022   100   100   001    Old_age   Always       -       103 0 103
183 SATA_Iface_Downshift    0x0032   100   100   001    Old_age   Always       -       0
184 End-to-End_Error        0x0033   100   100   050    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   001    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   001    Old_age   Always       -       0
189 Factory_Bad_Block_Ct    0x000e   100   100   001    Old_age   Always       -       48
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       0
195 Hardware_ECC_Recovered  0x003a   100   100   001    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   100   100   001    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   001    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   001    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   100   100   001    Old_age   Always       -       0
202 Perc_Rated_Life_Used    0x0018   097   097   001    Old_age   Offline      -       3
206 Write_Error_Rate        0x000e   100   100   001    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     36794         -
# 2  Short offline       Completed without error       00%     36780         -
# 3  Short offline       Completed without error       00%     36777         -
# 4  Extended offline    Completed without error       00%     36763         -
# 5  Short offline       Completed without error       00%     36749         -
# 6  Short offline       Completed without error       00%     36735         -
# 7  Short offline       Completed without error       00%     36721         -
# 8  Short offline       Completed without error       00%     36704         -
# 9  Short offline       Completed without error       00%     36689         -
#10  Short offline       Completed without error       00%     36673         -
#11  Short offline       Completed without error       00%     36660         -
#12  Short offline       Completed without error       00%     36644         -
#13  Short offline       Completed without error       00%     36630         -
#14  Short offline       Completed without error       00%     36616         -
#15  Short offline       Completed without error       00%     36602         -
#16  Short offline       Completed without error       00%     36588         -
#17  Short offline       Completed without error       00%     36583         -
#18  Short offline       Completed without error       00%     36570         -
#19  Short offline       Completed without error       00%     36556         -
#20  Short offline       Completed without error       00%     36542         -
#21  Short offline       Completed without error       00%     36526         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Re : MAJ Tumbleweed

Répondre #17
Ah ?? ton disque dur fait pas plus que 60 Go !!!
alors ma clé usb3 de 115 Go sera plus à l'aise avec la Suse en btrfs que toi. Je verrai à l'usage.
Mais tes déboires sont apparemment dus à une Suse trop à l'étroit en btrfs sur un disque de 60 Go.
A mon avis tu ferais mieux de re-installer ta Suse mais en ext4.
Comme je te l'ai dit plus haut, en ext4, ma Suse Tumbleweed occupe en / que  7 Go sur une partition de 15Go.

Re : MAJ Tumbleweed

Répondre #18
Ah ?? ton disque dur fait pas plus que 60 Go !!!
64 pour être précis ! Il est aussi vieux que mon PC ! D'où l'idée de changer.
Bah, je n'avais jamais eu ce problème depuis que je suis passé en btrfs (depuis la 15 je crois, peut-être avant) et ce jusqu'à l'avant-dernière mise à jour où j'ai commencé à voir poindre le problème. Bizarre tout de même !
Je vais tout de même tester ton idée.


Re : MAJ Tumbleweed

Répondre #19
Tu es sur Leap 15.1 ou tumbleweed ?
regardes dans usr ce qui semble volumineux
ls -lS /usr


Re : MAJ Tumbleweed

Répondre #20
Le précédent relevé par la commande df intervenait après une réinstall neuve. Donc, des répertoires peu sollicités.
Comme suggéré par moniroje, je viens de réinstaller Tumbleweed en reformatant mes partitions en ext4 car j'ai possiblement un problème avec btrfs.
Maintenant,  df -hT donne :
Sys. de fichiers Type     Taille Utilisé Dispo Uti% Monté sur
devtmpfs         devtmpfs   7,8G       0  7,8G   0% /dev
tmpfs            tmpfs      7,8G     89M  7,8G   2% /dev/shm
tmpfs            tmpfs      7,8G    1,7M  7,8G   1% /run
tmpfs            tmpfs      7,8G       0  7,8G   0% /sys/fs/cgroup
/dev/sda3        ext4       4,9G    375M  4,3G   8% /
/dev/sda5        ext4        35G    6,5G   26G  21% /usr
/dev/sda6        ext4       6,9G    1,9G  4,6G  30% /opt
/dev/sda8        ext4       2,0G    6,1M  1,8G   1% /srv
/dev/sda2        ext4       976M     53M  857M   6% /boot
/dev/sda9        ext4       3,1G     14M  2,9G   1% /tmp
/dev/sda7        ext4       5,9G    289M  5,3G   6% /var
/dev/sda1        vfat       511M    5,2M  506M   2% /boot/efi
/dev/sdb3        xfs        1,1T    180G  845G  18% /data
/dev/sdb2        xfs        830G    219G  612G  27% /home
tmpfs            tmpfs      1,6G     12K  1,6G   1% /run/user/1000

ls -lS /usr renvoie :
total 284
drwxr-xr-x 116 root root 122880  5 févr. 18:16 lib64
drwxr-xr-x   2 root root  69632  5 févr. 18:16 bin
drwxr-xr-x  96 root root  20480  5 févr. 19:40 lib
drwxr-xr-x   2 root root  20480  5 févr. 18:02 sbin
drwx------   2 root root  16384  5 févr. 17:43 lost+found
drwxr-xr-x 300 root root  12288  5 févr. 19:40 share
drwxr-xr-x   4 root root   4096  5 févr. 17:48 etc
drwxr-xr-x  51 root root   4096  5 févr. 18:02 include
drwxr-xr-x   2 root root   4096 26 sept. 20:57 libexec
drwxr-xr-x  12 root root   4096  5 févr. 17:44 local
drwxr-xr-x   7 root root   4096  5 févr. 18:02 src
drwxr-xr-x   5 root root   4096  5 févr. 17:44 x86_64-suse-linux

Je n'ai pas encore installé quoique ce soit hormis les pilotes pour mon imprimante (hplip) et mon scanner (epson).
J'ai fais une copie de 3 répertoires (soit 3 Go de données) vers /opt sans problème alors que précédemment un répertoire de 256 Mo refusait de se copier dans un /opt vide de 7 Go, par manque de place !!!
Je ne pige pas trop. C'est, soit un bug de Tumbleweed, soit un problème de DD mais à priori SMART ne révèle rien de particulier, ou encore la petite taille de mon DD (assez ancien il est vrai) pose problème à btrfs.
Je vais continuer à faire des manips et à installer toute une batterie de logiciels que j'utilise journellement ou à l'occasion et je vais voir ce qui se passe. Que ce soit bon ou mauvais, je tiens la communauté informée.

Re : MAJ Tumbleweed

Répondre #21
Salut,

Que te renvoies un

btrfs fi df /usr

? La même chose ?

Re : MAJ Tumbleweed

Répondre #22
Salut Sogal,

Je n'ai pas noté le résultat des commandes btrfs, fort agacé que j'étais. Si je me souviens bien, c'était du même acabit.

A noter que je viens de faire une vague d'install sans souci, en ext4. Le dossier /usr est occupé à 23 %.